Things to Keep in Mind while Installing Network Cables

As an electrician, you might have studied about installing network cables. Sometimes, the installation might seem easy looking at the instruction guide. However, it gets difficult when it comes to the real procedure. If you fail to install the network cables properly, it is sure to bring up several problems later which will ask you to spend a lot of finances and time.

Several IT professionals have confessed time and again that there aren’t many major mistakes that lead to the issues occurring in the network. A few important mistakes are enough. To keep these network issues at bay, there are certain things you must keep in mind before you go about making installations.

Take a look at some of them given below:

Plan Well in Advance

Before you start installing network cables, it is important to have a chart or drawing of how you want to lay them out in the network. You can also assess your current network requirements, find out how the previous network installation worked and if there was any. When you plan the installation of cables ahead of time, it saves a lot of your time and boosts your productivity. So, ensure that you have a plan in place.

Keep the Rules in Mind

There are several laws, codes, and standards at local, state, Federal level. Ignoring these laws can prove to be disastrous not just legally but also morally. You would definitely not want mishaps and accidents at the places where you have made installations and end up paying hefty fines. So, make sure that you have ample amount of knowledge about the standards that are applicable to your company and you are good to go.

Conduct Environmental Check

Is a lot of heat expected to be around where your wires are? If the answer to this question is yes, it could heat up your cables and cause network failure. Not just that, it would also compromise the safety of workers and network installers. Hence, in case if your wires are likely to heat up, ensure that you have a system in place that keeps your cables dry and cool. Install cooling systems and air conditioners if the need be.

Consider Distance Limitations

100 meters is an ideal limit when it comes to cable length. You should also consider that every cable has its own limit and distance includes path leads. If you know about the cabling you are going to use for your network, it would prove to be useful. Read more about the cables, speak with the concerned authorities and your work is sure to get easier!

Segregate Data & Voice Cables

Some years ago, voice and data had different set-ups. However, as the end users had different needs, it didn’t remain a viable option. The best thing to do in such cases would be to use a twisted pair of cables. Get in touch with a system designer and they would plan a telecommunication infrastructure that can work with two voice ports (phone and fax) and two data ports like video and ethernet. ‘Search for ethernet cable near me’ and you would be able to find CAT5 systems that can take care of your need.

Keep Interfering Devices at Bay

Electromagnetic and magnetic Interference plays a major role in messing up your cabling set up. Even the most negligible things like fluorescent lighting and motors can cause it. So, make sure that the cable pathway of your network is void of these interferences and hazards. Even if you run a cable parallel to electric cables, it can create data transmission interference from one point to the other. The best way to prevent this is to cross them perpendicularly. You also need to take care that there are no hindrances as such even at a later stage.

Manage Your Cables Well

Testing your network cables is necessary. But that is not it. You will not get a good quality network performance if you do not manage your cables well. Label your cables, organize them and use racks so that you can identify and segregate and access them easily. Although organizing cables might take up your time in the beginning, it will save a lot of your time at a later stage.

Test Your Network

You might be very happy with the layout of your cables once you have installed them. However, it is not enough. You must test your network and find out about the issues you might have overlooked before you activate it. If there are any safety and data transmission issues, ensure that you make use of the right tools to take care of them.

Take Help from Professionals

There are times when you might get confused and wouldn’t know how to resolve the issues related to a network cable. This is when you would need an expert to supervise your work. You can get in touch with a professional and they would help you to set up your network in an efficient and safe manner.

Are you looking for ethernet and network cables in the USA? Search for ‘ethernet cable near me’ and you will surely come across SF Cable’s website. Buy from the best!